MOKiN 65W PD Wall Charger with TrueGround Anti-Shock Tech

Cheap chargers work — until they don't. The real cost difference is what the cheaper charger skips: a protective earth path and independent safety testing. The MOKiN 65W charger is certified under IEC 62368-1 (International Electrotechnical Commission standard) as Class I equipment, meaning leakage current is routed to earth rather than through your hands. It holds ST COA No. 022161/25 from Suruhanjaya Tenaga (Malaysia's Energy Commission), tested by Eurofins under the CB Scheme. That independent lab testing is what you are paying for — not the plug. IEC 62368-1:2018 is the same standard applied to Apple and Anker chargers sold globally.

Yes — that tingle is real and it is leakage current reaching your skin. On a Class II charger (insulation only, no earth path), leakage current has nowhere to go except through the device frame and into your hands. iPhone and iPad users on Class II chargers commonly feel this on the aluminium body during charging. The MOKiN 65W charger is certified under IEC 62368-1:2018 (International Electrotechnical Commission) as Class I equipment — the earth pin routes that leakage current safely to ground, measuring 0mA touch current. TrueGround is MOKiN's implementation of this Class I standard. The tingle stops. The full CB test report and Eurofins Certificate of Approval are available on request.

This charger has one USB-C port, so it charges one device at a time. At 65W, it covers all USB-C iPhones (iPhone 15 series and newer, including iPhone 17 and future USB-C models), Samsung Galaxy phones, Google Pixel phones, iPads, MacBook Air, MacBook Pro, Dell XPS, Surface Pro, and any device that supports USB-C Power Delivery. Each device negotiates the wattage it needs — your phone will not receive laptop-level power by mistake. For multi-device simultaneous charging, check MOKiN's multi-port charger range at mokin.my.

The MOKiN 65W charger holds four certifications. ST COA No. 022161/25 from Suruhanjaya Tenaga (Malaysia's Energy Commission) — this is the legally mandatory approval for chargers sold in Malaysia, tested under IEC 62368-1:2018 (International Electrotechnical Commission) via the CB Scheme by Eurofins. It also carries CE and RoHS. In plain terms: ST approval means an independent lab verified this charger meets Malaysian electrical safety law before it was sold. The Class I grounding classification — meaning a protective earth conductor is present — is confirmed within that same IEC 62368-1:2018 test. Certification order matters to us: SIRIM (Standards and Industrial Research Institute of Malaysia) / ST first, because that is the authority that governs what is legally sold here.

The MOKiN 65W charger carries a 24-month warranty against manufacturing defects from your date of purchase. To make a claim, reach MOKiN through any of these channels: WhatsApp +601125560060, email support@mokin.my, the contact form at mokin.my/pages/contact, or in-store. Keep your proof of purchase — it is needed to confirm the purchase date. Manufacturing defects are covered; physical damage from drops or misuse is not. In practical terms: if the charger stops working normally within two years and you have not physically damaged it, contact the team and they will sort it out.

The MOKiN 65W charger uses a Malaysian three-pin plug (Type G). It works on 100-240V input, so the internal electronics are compatible with electrical systems across most countries. However, the physical plug is Malaysian Type G — you will need a travel adapter for countries using different socket types. ST COA No. 022161/25 from Suruhanjaya Tenaga (Suruhanjaya Tenaga, Malaysia's Energy Commission) confirms it meets Malaysian mandatory safety requirements. For international safety marks, note the CB Scheme certification (tested by Eurofins under IEC 62368-1:2018) is recognised across 57 member countries. Check the voltage label on the charger before plugging into any foreign socket.